Vendors
  DT Intercept  
Advanced IMSI catchers. Direct Finders
 
+358 9 3158 7490‬
ˆ 1,05
Your basket
Total
0 $
Checkout
 
 
Best IMSI catchers and Interceptors
MainCatalogCellular interceptionInvader. Active GSM Interceptor

Invader. Active Interrogation and Interception system

Print
Invader. Active GSM Interceptor
Invader. Active GSM Interceptor
  • Invader. Active GSM Interceptor
  • Invader in case
  • Invader in the car
  • Invader. Active GSM Interceptor
Main characteristics
SKU 2116
Vendor Intercept
Category Cellular interception
Standart 2G/900/1800/850/1900 - 5G - More … 2G/900/1800/850/1900 - 5G - 4G - 3G
System output Voice, SMS and call related data
Power source 110/240V AC or 12V DC, 100W
Active range (m) 500
OS Windows 7, 10
Decryption A5.2, A5.1, (A5,3 via downgrade); up to 20 keys per sec
Battery via AC-DC converter
Display 17” TFT, 1024x768
SMS(MMS) in all languages
Antenna Single directional or omnidirectional
Q'ty of channels 8 can be expanded up to 12
Internet Yes
Connectors USB
Datacom GPRS / EDGE analyzer
Protocols IMEI, IMSI, TMSI
Management API, IP
Delivery set Interceptor, Laptop, antenna, AC-DC converter, S\W
Dimensions, HWD CASE, 19" RACK, 2U, 413 mm
Weight 10 kg
Shipment According to EUC

Invader Active Interrogation and Interception system

The Invader-AS-2B acts as a standard GSM Base Station which attracts GSM mobile devices in its near vicinity, and controls their modes
of operation, including identity retrieval, calls and SMS. 
The system allows its operator to either release the captured device back to the real network, or leave it under the system control, monitoring, intercepting and storing all its traffic.
The Invader-AS-2B includes two BTS modules, where each BTS can monitor a different GSM band, allowing extended coverage. Larger configurations are supported including 4 or 6 base stations facilitating simultaneous monitoring of 2 or 3 cellular networks.
When connected to decipher unit (locally or remotely), the system can intercept ciphered calls and SMS (A5/1 and A5/2)  

Common Uses of Invader-AS-2B

• On the Air Interception
• IMSI/IMEI catching (3G,4G,5G Separately)
• Selective jamming of communication
• Presence Detection
• Data Analysis
• Direction Finding Support
• Phone manipulation

2 BTS GSM Interception system

Active.jpg


File Title Release Date File Type Size (mb) Action
End User Certificate (EUC) to apply for purchase 03-03-2021 Documentation (pdf) 0.09 MB download

To access this product file, get partner STE status


• Automatic network scan and system setup
• Cloning of a real cellular network
• Simulating GSM 850,1900,900,1800 base stations
• Presence detection of specific mobile devices/targets
• Real-time calls and SMS interception of A5/0/1/2 cellular networks
• Supports up to 5-12 full-duplex concurrent calls
• Supports A5/0 reduction
• built-in A5/2 decipher
• built or remote- A5/1 decipher
• Voice and data recording on hard disk
• Outgoing and incoming call number determination
• DTMF tones interception
• Ability to interrupt ongoing calls
• Ability to selectively prevent calls
• Manipulate communication (calls & SMSs)
• Cause any targeted GSM phone transmit an RF-beacon that can be DF located
• Capturing mobile phones within range and extracting their cellular identifiers (IMSI, IMEI, TMSI, MSISDN)
File Title Release Date File Type Size (mb) Action
End User Certificate (EUC) to apply for purchase 03-03-2021 Documentation (pdf) 0.09 MB download

To access this product file, get partner STE status


Frequency stability of each receiver   850/ 900/1800/1900 MHz
Voice codec types+0.04 ppm
Frequency stabilityLPT-RPE, FR, EFR, HR, AMR
Sensitivity of Receiver Unit±50 PPB
Sensitivity of Receiver Unitbetter than -102 dBm (signal/noise =19) dB
AGC – dynamic range25 dB
SynchronizationAdaptive
DemodulatorGMSK
Error correctionViterbi decoder
Impedance of antenna input/output50 Ohm
RF output Power2W (optional 20W external Power Amplifier)
Power supply:110/240V AC or 12V DC
Power consumption60W (additional 100W per PA per BTS)
Operating temperature range+ 5° C to +45° C
Rated temperature range+ 5° C to +45° C
Storage temperature range-15° C to +60° C
Humidity+42° C at 92%
Form FactorCASE, 19" RACK, 2U, 413MM

File Title Release Date File Type Size (mb) Action
End User Certificate (EUC) to apply for purchase 03-03-2021 Documentation (pdf) 0.09 MB download

To access this product file, get partner STE status


red1.jpg Demo or training are carried out in our premises or in the client's country, subject to an official invitation from government agencies.

red1.jpg We provide online demos only to existing clients with whom we have successful experience of cooperation.

red1.jpg We do not provide free training. If you are not familiar with the subject, links to training courses are here.

red1.jpg To apply for a demo or training you should provide a completed end user certificate

File Title Release Date File Type Size (mb) Action
End User Certificate (EUC) to apply for purchase 03-03-2021 Documentation (pdf) 0.09 MB download

To access this product file, get partner STE status

File Title Release Date File Type Size (mb) Action
End User Certificate (EUC) to apply for purchase 03-03-2021 Documentation (pdf) 0.09 MB download

To access this product file, get partner STE status

Additional Product Information
Can simultaneously work on multiple carriers
Very simple interface. Full automation of the process. Minimum settings.
Related products

You may also be interested in the following products

 
Product added to the basket.
Make a purchase
Delivery
Continue
Deny
Order Product
Product name
Quantity*
Contacts
Name*
E-mail*
Phone*
Comment